HouseMaster - "The Inspection Company You Keep"

Septic Dye Flow Inspections
	Septic dye tests involve flushing a special florescent dye down a toilet or other drain. The dye itself does not make anything happen. It is simply a colored indicator that can identify water found outside as having come from the fixture where the dye was introduced. It's the volume of water introduced into the system that forms the actual "test". If waste water is coming to the surface (an unsanitary condition indicating serious septic failure) one may see dye in that water, provided the septic system is flowing at common rates. When suspect wet areas are observed, if the system has no maintenance history, if the area is known to have problem soils, or if other historic or site conditions raise question about the condition of the system we recommend that the inspector perform a dye test. A septic loading and dye test will by no means find every septic failure, but this methods finds many failures that otherwise are unnoticed by a home buyer until shortly after moving-in. Septic loading and dye tests are complementary to and should precede any further inspection steps taken such as pumping the septic tank. For more information regarding septic systems, visit our Information Series here.
Back uuuuu

ENCO Home Inspection, LLC is a wholly, independently owned and operated franchisee of HMA Franchise Systems, Inc. The information and views provided within these web pages have no reflection on HMA, and HMA is held harmless from any statements, views, comments or otherwise.